If you are in search of dependable SCD1780-4-11D Screw Close Tolerance products, you can count on Rapid Mil Parts. You have taken a particular interest in part number SCD1780-4-11D, a Alcoa Global Fasteners Inc component that is listed with the NSN 5305012729977 for identification purposes. When you are prepared to start the purchasing process for part number SCD1780-4-11D, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number SCD1780-4-11D is listed alongside the NSN 5305-01-272-9977 and is categorized under the FSC 5305 Screws.
Additionally, this NSN part is specifically produced under CAGE Code 06950, which identifies the specific Alcoa Global Fasteners Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-272-9977 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 012729977 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HR203-4-11D | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.351 INCHES MINIMUM AND 0.418 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.049 INCHES MINIMUM AND 1.096 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.464 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ANEE | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 156000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.881 INCHES MINIMUM AND 0.913 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
