If you are in search of dependable A505-1 Shaft Assembly Flexible products, you can count on Rapid Mil Parts. You have taken a particular interest in part number A505-1, a Alliant Defense Electronics Systems component that is listed with the NSN 1680005546593 for identification purposes. When you are prepared to start the purchasing process for part number A505-1, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number A505-1 is listed alongside the NSN 1680-00-554-6593 and is categorized under the FSC 1680 Miscellaneous Aircraft Accessories Components.
Additionally, this NSN part is specifically produced under CAGE Code 93712, which identifies the specific Alliant Defense Electronics Systems facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1680-00-554-6593 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE | 1680 | 005546593 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A505-15 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2 BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AAUJ | SPLINE MAJOR DIAMETER | 0.270 INCHES NOMINAL BOTH ENDS |
| ABHP | OVERALL LENGTH | 98.163 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| ABSC | SPLINE MINOR DIAMETER | 0.228 INCHES NOMINAL BOTH ENDS |
| AECT | THREAD DEPTH | 0.220 INCHES NOMINAL BOTH ENDS |
| AEDN | TIP LENGTH | 0.521 INCHES NOMINAL BOTH ENDS |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.500 INCHES NOMINAL BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| AGPX | SHOULDER OUTSIDE DIAMETER | 0.562 INCHES NOMINAL BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS BOTH ENDS |
| AKMH | CORE DIAMETER | 0.276 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| APTD | END TYPE | ROUND,INTERNAL SPLINED BOTH ENDS |
| ASDB | WIDTH ACROSS FLATS | 0.870 INCHES NOMINAL BOTH ENDS |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| AXFH | SPLINE LENGTH | 0.250 INCHES NOMINAL BOTH ENDS |
| AXYS | SPLINE TYPE | INVOLUTE BOTH ENDS |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | STEEL |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.420 INCHES NOMINAL DIAMETER BOTH ENDS |
| CFRM | TORSIONAL DEFLECTION RATING | 30 DEG FT-LB IN. |
| CFRN | CASING SURFACE TREATMENT | ZINC COATED |
| CFRP | CASING LENGTH BETWEEN FERRULES | 97.120 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.530 INCHES NOMINAL |
| CFRR | CASING PROTECTIVE DEVICE TYPE | BRAIDED WIRE SHIELD |
| CFRT | SWIVEL END | PROVIDED BOTH ENDS |
| CFRW | END OVERALL DIAMETER | 0.620 INCHES NOMINAL BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 98.163 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | 12.000 INCHES |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 695694-1 DRAWING NUMBER |
| ZZZV | FSC APPLICATION DATA | ACTUATORS,MECHANICAL,TRIM TAB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
