If you are in search of dependable 11TR1427 Synchroreceiver products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 11TR1427, a Ametek Technical And Industrial Products Inc component that is listed with the NSN 5990002516719 for identification purposes. When you are prepared to start the purchasing process for part number 11TR1427, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 11TR1427 is listed alongside the NSN 5990-00-251-6719 and is categorized under the FSC 5990 Synchros and Resolvers.
Additionally, this NSN part is specifically produced under CAGE Code 14404, which identifies the specific Ametek Technical And Industrial Products Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-251-6719 Item PartTypeName: SYNCHRO,RECEIVER | 5990 | 002516719 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11TR1427 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.8610 INCHES MINIMUM AND 1.8910 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1190 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.2410 INCHES MINIMUM AND 0.2710 INCHES MAXIMUM SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 25.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| AJSW | ZRO RESISTANCE IN OHMS | 920.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 14.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 1100.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 406.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 9.30 NOMINAL |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6000.0 CENTIMETER-GRAMS MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 2000.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6200 INCHES NOMINAL |
| ALNF | SHAFT HOLE DIAMETER | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 4800.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 43.00 NOMINAL |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.1150 INCHES NOMINAL SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 500.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,HOLLOWED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0900 INCHES MAXIMUM |
| CSJY | TRANSFORMATION RATIO | 0.103 STATOR TO ROTOR NOMINAL |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES NOMINAL |
| CWAC | SHAFT TAPER LENGTH | 0.0550 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
