If you are in search of dependable 176057-001 Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 176057-001, a Bae Systems Inc component that is listed with the NSN 5905009453330 for identification purposes. When you are prepared to start the purchasing process for part number 176057-001, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 176057-001 is listed alongside the NSN 5905-00-945-3330 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 81413, which identifies the specific Bae Systems Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-945-3330 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 009453330 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 176057-001 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.000 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.083 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO 300.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
