If you are in search of dependable 179669-002 Resolver Electrical products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 179669-002, a Bae Systems Inc component that is listed with the NSN 5990007270717 for identification purposes. When you are prepared to start the purchasing process for part number 179669-002, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 179669-002 is listed alongside the NSN 5990-00-727-0717 and is categorized under the FSC 5990 Synchros and Resolvers.
Additionally, this NSN part is specifically produced under CAGE Code 81413, which identifies the specific Bae Systems Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-727-0717 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 007270717 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 179669-002 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.3360 INCHES MINIMUM AND 2.3600 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3660 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 363.80 MINIMUM AND 472.20 MAXIMUM |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 263.50 MINIMUM AND 356.50 MAXIMUM |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWR | SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.9700 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 1717.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 1725.50 MINIMUM AND 2304.50 MAXIMUM |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 29.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 412.25 MINIMUM AND 557.75 MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 289.00 MINIMUM AND 391.00 MAXIMUM |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 318.75 MINIMUM AND 431.25 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.500 INPUT TO OUTPUT MINIMUM AND 11.500 INPUT TO OUTPUT MAXIMUM |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.70 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.0 CENTIMETER-GRAMS NOMINAL |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
