If you are in search of dependable 12948171 Clamp Block Section products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 12948171, a Bae Systems Land And Armaments Inc component that is listed with the NSN 5340013549678 for identification purposes. When you are prepared to start the purchasing process for part number 12948171, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 12948171 is listed alongside the NSN 5340-01-354-9678 and is categorized under the FSC 5340 Hardware Commercial.
Additionally, this NSN part is specifically produced under CAGE Code 06085, which identifies the specific Bae Systems Land And Armaments Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-354-9678 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 013549678 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12948171 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.940 INCHES MINIMUM AND 1.060 INCHES MAXIMUM |
| CWYS | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES | 6.680 INCHES NOMINAL |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 7.804 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 6 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.625 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.750 INCHES NOMINAL |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 3.370 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 9.750 INCHES MINIMUM AND 9.870 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.500 INCHES NOMINAL |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 2.431 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.620 INCHES NOMINAL |
| CWYM | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FIFTH CLAMPING HOLES | 4.120 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
| ABTJ | MOUNTING HOLE QUANTITY | 3 |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM ALL HOLES AND 0.310 INCHES MAXIMUM ALL HOLES0.190 INCHES MINIMUM FIRST HOLE AND 0.250 INCHES MAXIMUM FIRST HOLE0.380 INCHES MINIMUM SECOND HOLE AND 0.440 INCHES MAXIMUM SECOND HOLE |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 2.505 INCHES NOMINAL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
