If you are in search of dependable 1300-1090 Resistor Variable Wire Wound Pre products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 1300-1090, a Bei Sensors And Systems Company Inc component that is listed with the NSN 5905007278304 for identification purposes. When you are prepared to start the purchasing process for part number 1300-1090, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 1300-1090 is listed alongside the NSN 5905-00-727-8304 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 11534, which identifies the specific Bei Sensors And Systems Company Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-727-8304 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 007278304 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5839K79P003 | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.096 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.753 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.0670 INCHES MAXIMUM |
| AEDQ | UNDERCUT DIAMETER | 0.090 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFL | MAXIMUM RUNNING TORQUE | 0.50 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.0015 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.002 INCHES |
| AGQL | UNDERCUT LENGTH | 0.438 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 24 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0/2.0 DEG ANGULAR ROTATION SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 25 WIRE LEAD |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 0.9688 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.9688 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.067 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1248 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.562 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.203 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00250 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.00150 INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 24.000 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -0.0 TO 0.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 65.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 97424-5839K79 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
