If you are in search of dependable 9M702-4B1 Clamp Block Section products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 9M702-4B1, a Boeing Company The component that is listed with the NSN 5340012133783 for identification purposes. When you are prepared to start the purchasing process for part number 9M702-4B1, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 9M702-4B1 is listed alongside the NSN 5340-01-213-3783 and is categorized under the FSC 5340 Hardware Commercial.
Additionally, this NSN part is specifically produced under CAGE Code 76301, which identifies the specific Boeing Company The facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-213-3783 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 012133783 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 9M702-4B1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 3.748 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.433 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.197 INCHES NOMINAL |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 2.748 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.630 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 4 |
| CWWM | CLAMPING HOLE DIAMETER | 0.382 INCHES MINIMUM AND 0.398 INCHES MAXIMUM ALL HOLES |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.281 INCHES NOMINAL |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.624 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.687 INCHES NOMINAL |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 1.375 INCHES NOMINAL |
| CWYH | CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES | 2.061 INCHES NOMINAL |
| MATT | MATERIAL | PLASTIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | P.S. 14280 GR B CL 2,CAGEC 76301 MFR REF SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
