If you are in search of dependable 2001092302 Resistor Variable Wire Wound Pre products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 2001092302, a Bourns Instruments Inc component that is listed with the NSN 5905000899527 for identification purposes. When you are prepared to start the purchasing process for part number 2001092302, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 2001092302 is listed alongside the NSN 5905-00-089-9527 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 80294, which identifies the specific Bourns Instruments Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-089-9527 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 000899527 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2001092302 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR W/TAB/FLANGE MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | 0.900 INCHES MINIMUM |
| ABHP | OVERALL LENGTH | 11.580 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.000 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.201 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.188 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 4.830 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 6.110 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.950 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.930 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.201 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,THREADED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.440 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 5.550 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 12.5 KILOHMS ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/0.50 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 ALL SECTIONS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 6250.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 125.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 80378-215-48103-5 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
