If you are in search of dependable 220L1-102 Resistor Variable Wire Wound Non products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 220L1-102, a Bourns Instruments Inc component that is listed with the NSN 5905004743656 for identification purposes. When you are prepared to start the purchasing process for part number 220L1-102, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 220L1-102 is listed alongside the NSN 5905-00-474-3656 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 80294, which identifies the specific Bourns Instruments Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 1.035 INCHES MINIMUM AND 1.065 INCHES UM" |
| ABJT | TERMINAL LENGTH | 6.000 INCHES NOMINAL" |
| ABKW | III OVERALL HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| ABMK | III OVERALL WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES UM" |
| ABXF | SHAFT LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES UM" |
| ADAQ | BODY LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES UM" |
| ADAT | BODY WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BEARING" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.745 INCHES MINIMUM AND 0.755 INCHES UM" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROLLED FOR POLARIS" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 1.035 INCHES MINIMUM AND 1.065 INCHES UM" |
| ABJT | TERMINAL LENGTH | 6.000 INCHES NOMINAL" |
| ABKW | III OVERALL HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| ABMK | III OVERALL WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES UM" |
| ABXF | SHAFT LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES UM" |
| ADAQ | BODY LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES UM" |
| ADAT | BODY WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BEARING" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.745 INCHES MINIMUM AND 0.755 INCHES UM" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROLLED FOR POLARIS" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
