If you are in search of dependable WD5018 Gear Bevel products, you can count on Rapid Mil Parts. You have taken a particular interest in part number WD5018, a Carroll Engineering Co component that is listed with the NSN 3020008235081 for identification purposes. When you are prepared to start the purchasing process for part number WD5018, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number WD5018 is listed alongside the NSN 3020-00-823-5081 and is categorized under the FSC 3020 Gear Pulley Sprocket and Transmission Chain.
Additionally, this NSN part is specifically produced under CAGE Code 11708, which identifies the specific Carroll Engineering Co facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-823-5081 Item PartTypeName: GEAR,BEVEL | 3020 | 008235081 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WD5018 | 2 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGJS | PITCH DIAMETER | 7.7200 INCHES NOMINAL |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 56.0 ROCKWELL C MINIMUM OVERALL AND 61.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.769 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.335 INCHES |
| CWNM | TOOTH DIRECTION | LEFT |
| CWQD | PITCH ANGLE | 74.0500 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES SECOND END |
| CWRB | BODY RECESS NOMINAL DEPTH | 0.106 INCHES FIRST END |
| CWSN | KEYWAY NOMINAL WIDTH | 0.500 INCHES BOTH ENDS |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,ALLOY N0.4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY LH |
| AAQL | BODY STYLE | PLAIN,SOLID |
| AJLA | TEETH QUANTITY | 42 |
| CWMW | TEETH TYPE | SPIRAL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 1.125 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.502 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.308 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 3.313 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 3.500 INCHES SECOND END |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE,FRONT HUB RECESSED,BACK HUB PROTRUDING |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
