If you are in search of dependable RH103U Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number RH103U, a Clarostat Sensors And Controls component that is listed with the NSN 5905009214240 for identification purposes. When you are prepared to start the purchasing process for part number RH103U, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number RH103U is listed alongside the NSN 5905-00-921-4240 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 12697, which identifies the specific Clarostat Sensors And Controls facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-921-4240 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 009214240 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RH103U | 1 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.594 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.156 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.125 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.250 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.359 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.400 INCHES NOMINAL |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | 0.0 TO 7.0-55 DEG CELSIUS SINGLE SECTION AND 0.0 TO 3.5-25 DEG CELSIUS SINGLE SECTION AND 0.0 TO 2.0 0 DEG CELSIUS SINGLE SECTION AND-2.5 TO 2.5 85 DEG CELSIUS SINGLE SECTION AND 0.0 TO 5.5 125 DEG CELSIUS SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | ACTUATOR EQUIPPED WITH CUP-WASHER HOUSING |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
