If you are in search of dependable 57EJA20K Resistor Variable Wire Wound Non products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 57EJA20K, a Clarostat Sensors And Controls component that is listed with the NSN 5905009525027 for identification purposes. When you are prepared to start the purchasing process for part number 57EJA20K, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 57EJA20K is listed alongside the NSN 5905-00-952-5027 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 12697, which identifies the specific Clarostat Sensors And Controls facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-952-5027 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 009525027 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 400497 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.360 INCHES MINIMUM AND 1.548 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.485 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 310.0 NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 12 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 320.0 NOMINAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
