If you are in search of dependable CM41749 Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number CM41749, a Clarostat Sensors And Controls component that is listed with the NSN 5905011446464 for identification purposes. When you are prepared to start the purchasing process for part number CM41749, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number CM41749 is listed alongside the NSN 5905-01-144-6464 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 12697, which identifies the specific Clarostat Sensors And Controls facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-144-6464 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 011446464 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM41749 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 0.672 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.797 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 1ST SECTION AND 5.000 KILOHMS 2ND SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 EYELET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
