If you are in search of dependable CM44041-D380 4X Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number CM44041-D380 4X, a Clarostat Sensors And Controls component that is listed with the NSN 5905011694104 for identification purposes. When you are prepared to start the purchasing process for part number CM44041-D380 4X, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number CM44041-D380 4X is listed alongside the NSN 5905-01-169-4104 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 12697, which identifies the specific Clarostat Sensors And Controls facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-169-4104 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 011694104 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G166005 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPA | UNDERCUT DIAMETER | 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.094 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.438 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.203 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 312.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 15.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 15.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 192.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.516 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| AGQL | UNDERCUT LENGTH | 0.563 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | PANEL SEAL AND SHAFT SEAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS 1ST SECTION AND 500.000 OHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 312.0 NOMINAL |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0 TO 0.0-55 DEG CELSIUS ALL SECTIONS AND-5.0 TO 10.0-25 DEG CELSIUS ALL SECTIONS AND-5.0 TO 10.0 25 DEG CELSIUS ALL SECTIONS AND 0.0 TO 3.0 120 DEG CELSIUS ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| TEST | TEST DATA DOCUMENT | 49956-G166005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
