If you are in search of dependable CM45747-2 Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number CM45747-2, a Clarostat Sensors And Controls component that is listed with the NSN 5905012962166 for identification purposes. When you are prepared to start the purchasing process for part number CM45747-2, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number CM45747-2 is listed alongside the NSN 5905-01-296-2166 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 12697, which identifies the specific Clarostat Sensors And Controls facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-296-2166 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 012962166 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 148-0052 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.140 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.077 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.718 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,STEPPED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 MINIMUM AND 270.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 32.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | F/TF-15A ACFT |
| AGQL | UNDERCUT LENGTH | 0.343 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 0.114 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 300.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
