If you are in search of dependable 70TAN056P251U Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 70TAN056P251U, a Clarostat Sensors And Controls component that is listed with the NSN 5905013826157 for identification purposes. When you are prepared to start the purchasing process for part number 70TAN056P251U, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 70TAN056P251U is listed alongside the NSN 5905-01-382-6157 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 12697, which identifies the specific Clarostat Sensors And Controls facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-382-6157 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 013826157 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 70TAN056P251U | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| AEFM | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.289 INCHES MINIMUM AND 0.321 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 250.0 OHMS ALL SECTIONS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| ABWV | SHAFT DIAMETER | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 3 OCLOCK |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| ADAQ | BODY LENGTH | 0.921 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 2.50 INCH-OUNCES |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 2.50 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 MINIMUM AND 305.0 MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| CXHN | SHAFT BEARING TYPE | SLEEVE |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
