If you are in search of dependable 18-3137 Standoff Threaded Snap In products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 18-3137, a Drs Power And Control Technologies component that is listed with the NSN 5340014483222 for identification purposes. When you are prepared to start the purchasing process for part number 18-3137, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 18-3137 is listed alongside the NSN 5340-01-448-3222 and is categorized under the FSC 5340 Hardware Commercial.
Additionally, this NSN part is specifically produced under CAGE Code 27192, which identifies the specific Drs Power And Control Technologies facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-448-3222 Item PartTypeName: STANDOFF,THREADED,SNAP-IN | 5340 | 014483222 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18-3137 | 5 | 1 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MRC | Decoded Requirement | Clear Text Reply |
| AAJD | Thread Class | 2B RIGHT INTERNAL |
| AAJF | Thread Direction | RIGHT-HAND RIGHT INTERNAL |
| AAJF | Thread Direction | LEFT-HAND LEFT EXTERNAL |
| CXYF | Left Projection Chamfer Angle | 45.0 DEGREES NOMINAL |
| CQJX | Nominal Thread Size | 0.190 INCHES LEFT EXTERNAL |
| AATB | Width Between Flats | 0.375 INCHES NOMINAL |
| CRTL | Criticality Code Justification | ZZZY |
| ABRY | Length | 4.000 INCHES NOMINAL |
| CXXX | Right Projection Length | 0.374 INCHES NOMINAL |
| SFTT | Surface Treatment | PASSIVATE STANDOFF |
| TEST | Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | Thread Series Designator | UNC RIGHT INTERNAL |
| AAJD | Thread Class | 2A LEFT EXTERNAL |
| THSD | Thread Series Designator | UNF LEFT EXTERNAL |
| CQJX | Nominal Thread Size | 0.138 INCHES RIGHT INTERNAL |
| SPCL | Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| CMLP | Thread Quantity Per Inch | 32 RIGHT INTERNAL |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| CMLP | Thread Quantity Per Inch | 32 LEFT EXTERNAL |
| STDC | Surface Treatment Document And Classification | QQ-P-35,TYPE II FED SPEC SINGLE TREATMENT RESPONSE STANDOFF |
| AASA | Thread Length | 0.265 INCHES NOMINAL LEFT EXTERNAL |
| CXYD | Right End Chamfer Angle | 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| MATT | Material | STEEL COMP 303 STANDOFF |
| MDCL | Material Document And Classification | STM A581 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF |
| CXXW | Right Projection Diameter | 0.190 INCHES NOMINAL |
| STYL | Style Designator | LEFT INTERNAL AND RIGHT EXTERNAL THREAD |
| ZZZW | Departure From Cited Document | AS MODIFIED BY MATERIAL AND LOCKING FEATURE( AS APPLICABLE ) |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
