If you are in search of dependable 006281 Bearing Unit Ball products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 006281, a Electronic Systems Design Inc component that is listed with the NSN 3130012806977 for identification purposes. When you are prepared to start the purchasing process for part number 006281, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 006281 is listed alongside the NSN 3130-01-280-6977 and is categorized under the FSC 3130 Bearings Mounted.
Additionally, this NSN part is specifically produced under CAGE Code 61970, which identifies the specific Electronic Systems Design Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-280-6977 Item PartTypeName: BEARING UNIT,BALL | 3130 | 012806977 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TC-25-115/16 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABGC | SLOT WIDTH | 0.7500 INCHES NOMINAL |
| ABGD | SLOT LENGTH | 1.9375 INCHES NOMINAL |
| ABGF | GROOVE WIDTH | 0.6250 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 1.125 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.9375 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 5.7500 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 2.3124 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 4.7500 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 1.9375 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 3.3750 INCHES NOMINAL |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWHS | DISTANCE BETWEEN GROOVES | 3.9688 INCHES NOMINAL |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | PLASTIC POLYAMIDE SEAL |
| MATT | MATERIAL | STEEL BEARING |
| STYL | STYLE DESIGNATOR | FRAME TYPE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
