If you are in search of dependable 01-435-0027-5PC44 Gear Helical products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 01-435-0027-5PC44, a Flowserve Corporation component that is listed with the NSN 3020006060786 for identification purposes. When you are prepared to start the purchasing process for part number 01-435-0027-5PC44, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 01-435-0027-5PC44 is listed alongside the NSN 3020-00-606-0786 and is categorized under the FSC 3020 Gear Pulley Sprocket and Transmission Chain.
Additionally, this NSN part is specifically produced under CAGE Code 52374, which identifies the specific Flowserve Corporation facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-606-0786 Item PartTypeName: GEAR,HELICAL | 3020 | 006060786 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 01-435-0027-5PC44 | C | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 2.6000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 26 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB,FIRST END |
| CQFM | HARDNESS RATING | 265.0 BRINELL STANDARD MINIMUM OVERALL AND 321.0 BRINELL STANDARD MAXIMUM OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.250 INCHES TRANSVERSELY THROUGH HUB,FIRST END |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.7670 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | SPECIAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 14.9167 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.438 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 1.312 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 1.250 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.250 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.750 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.000 INCHES FIRST END |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.937 INCHES FIRST END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 1.750 INCHES FIRST END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.165 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | MTG HOLE 90 DEGS FROMKEYWAY,CENTERED IN GROOVE |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL AND AISI/SAE 4140 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| TMQY | FURNISHED ITEMS AND QUANTITY | 1 SETSCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
