If you are in search of dependable LSCP270032-5 Hose Assembly Nonmetallic products, you can count on Rapid Mil Parts. You have taken a particular interest in part number LSCP270032-5, a General Dynamics Land Systems Inc component that is listed with the NSN 4720014606516 for identification purposes. When you are prepared to start the purchasing process for part number LSCP270032-5, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number LSCP270032-5 is listed alongside the NSN 4720-01-460-6516 and is categorized under the FSC 4720 Hose and Tubing Flexible.
Additionally, this NSN part is specifically produced under CAGE Code 01417, which identifies the specific General Dynamics Land Systems Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-460-6516 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014606516 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LSCP270032-41 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | Flange Thickness | 0.295 INCHES NOMINAL 1ST END |
| AFQN | Flange Length | 3.190 INCHES NOMINAL 1ST END |
| AGFF | Flange Width | 2.750 INCHES NOMINAL 1ST END |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| ABKV | Outside Diameter | 1.542 INCHES NOMINAL |
| ACKH | Minimum Inside Bending Radius | 12.000 INCHES |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| AAJD | Thread Class | 1A 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| AWLS | Connection Type | THREADED EXTERNAL TUBE 2ND END |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGM | Maximum Operating Pressure | 4000.0 POUNDS PER SQUARE INCH |
| AECS | Bolt Hole Quantity | 4 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| AKUT | End Flange Construction | SPLIT 1ST END |
| THSD | Thread Series Designator | UN 2ND END |
| CRDW | Hydrostatic Test Pressure | 8000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 34.380 INCHES NOMINAL WORKING |
| CRFY | Flow Angle | 45.0 DEGREES 2ND END |
| AKXM | Fitting Component And Surface Treatment | COMPLETE FITTING CADMIUM 1ST END |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| ADUY | Center To Center Distance Between Bolt Holes Along Width | 1.093 INCHES NOMINAL 1ST END |
| CRFY | Flow Angle | 90.0 DEGREES 1ST END |
| ADUZ | Center To Center Distance Between Bolt Holes Along Length | 2.312 INCHES NOMINAL 1ST END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| CQBD | Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH |
| CTCJ | Flange Style | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| CRWL | Inside Surface Condition | SMOOTH |
| CQJX | Nominal Thread Size | 1.312 INCHES 2ND END |
| AARX | Inside Diameter | 1.000 INCHES NOMINAL |
| MEDA | Media For Which Designed | HYDRAULIC FLUID SINGLE RESPONSE |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT |
| FEAT | Special Features | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL , INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| MRC | Decoded Requirement | Clear Text Reply |
| AAGR | Cross-Sectional Shape Style | ROUND |
| AGAV | End Item Identification | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE |
| AHNX | Bolt Hole Diameter | 0.469 INCHES NOMINAL 1ST END |
| CMLP | Thread Quantity Per Inch | 12 2ND END |
| AHNC | Connection Style | SWIVEL, PLAIN 2ND END |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 90 |
| CQCS | Layer Composition And Location | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
