If you are in search of dependable LSCP270032-13 Hose Assembly Nonmetallic products, you can count on Rapid Mil Parts. You have taken a particular interest in part number LSCP270032-13, a General Dynamics Land Systems Inc component that is listed with the NSN 4720014619005 for identification purposes. When you are prepared to start the purchasing process for part number LSCP270032-13, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number LSCP270032-13 is listed alongside the NSN 4720-01-461-9005 and is categorized under the FSC 4720 Hose and Tubing Flexible.
Additionally, this NSN part is specifically produced under CAGE Code 01417, which identifies the specific General Dynamics Land Systems Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-461-9005 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014619005 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| LSCP270032-13 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END" |
| ABKV | OUTSIDE DIAMETER | 1.542 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES" |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AFQN | FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END" |
| AGAV | END ITEM IDENTIFICATION | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE" |
| AGFF | FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 32.750 INCHES NOMINAL WORKING" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AARX | INSIDE DIAMETER | 1.000 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKU | FLANGE THICKNESS | 0.295 INCHES NOMINAL 1ST END" |
| ABKV | OUTSIDE DIAMETER | 1.542 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES" |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0" |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.093 INCHES NOMINAL 1ST END" |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END" |
| AECS | BOLT HOLE QUANTITY | 4 1ST END" |
| AFQN | FLANGE LENGTH | 3.190 INCHES NOMINAL 1ST END" |
| AGAV | END ITEM IDENTIFICATION | M1 ABRAHMS LAUNCHER AND PORTABLE BRIDGE" |
| AGFF | FLANGE WIDTH | 2.750 INCHES NOMINAL 1ST END" |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE 1ST END" |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END" |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END" |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END" |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END" |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND" |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH" |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH" |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 32.750 INCHES NOMINAL WORKING" |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
