If you are in search of dependable 132D1333 Gear Spur products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 132D1333, a General Dynamics Ots Global Inc component that is listed with the NSN 3020012312365 for identification purposes. When you are prepared to start the purchasing process for part number 132D1333, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 132D1333 is listed alongside the NSN 3020-01-231-2365 and is categorized under the FSC 3020 Gear Pulley Sprocket and Transmission Chain.
Additionally, this NSN part is specifically produced under CAGE Code 05606, which identifies the specific General Dynamics Ots Global Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-231-2365 Item PartTypeName: GEAR,SPUR | 3020 | 012312365 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 132D1333 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSA | SPLINE QUANTITY | 23 BOTH ENDS |
| AGJS | PITCH DIAMETER | 3.1373 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| BDTX | SPLINE PITCH DIAMETER | 0.7188 INCHES NOMINAL BOTH ENDS |
| CQFM | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 3.395 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 2.078 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.281 INCHES FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.380 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.422 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.740 INCHES BOTH ENDS |
| CWRX | BORE NOMINAL DEPTH | 1.004 INCHES BOTH ENDS |
| CWTB | COUNTERBORE NOMINAL DEPTH | 1.080 INCHES FIRST END |
| CWTG | COUNTERBORE NOMINAL DIAMETER | 0.796 INCHES FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 0.999 INCHES SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 1.249 INCHES FIRST END |
| FEAT | SPECIAL FEATURES | DISTANCE FROM END OF HUB TO CENTER OF TAPPED HOLE 0.255 NOM. IN.; TOOTH PRESSURE ANGLE 30.0 DEG; END ITEM IDENTIFICATION AMMO LOADER COMP,GENERAL ELECTRIC,P/N 205F264 |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE 4140 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| SUPP | SUPPLEMENTARY FEATURES | W/ TIMING MARK,MESHES W/ P/N 132D1335 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
