If you are in search of dependable 135B6906 Bracket Angle products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 135B6906, a General Dynamics Ots Global Inc component that is listed with the NSN 5340004024977 for identification purposes. When you are prepared to start the purchasing process for part number 135B6906, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 135B6906 is listed alongside the NSN 5340-00-402-4977 and is categorized under the FSC 5340 Hardware Commercial.
Additionally, this NSN part is specifically produced under CAGE Code 05606, which identifies the specific General Dynamics Ots Global Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-402-4977 Item PartTypeName: BRACKET,ANGLE | 5340 | 004024977 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 135B6906 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 1.040 INCHES MINIMUM AND 1.100 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| AHLK | FIRST LEG HOLE DIAMETER | 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| AHLZ | SECOND LEG SLOT LENGTH | 0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| AHMA | SECOND LEG SLOT WIDTH | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| AHQN | FIRST LEG WIDTH | 0.840 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 301 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 TEMP 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | ANGLE |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
