If you are in search of dependable WP1 2-108 Resistor Variable Wire Wound Pre products, you can count on Rapid Mil Parts. You have taken a particular interest in part number WP1 2-108, a Honeywell Sensing And Control component that is listed with the NSN 5905009507660 for identification purposes. When you are prepared to start the purchasing process for part number WP1 2-108, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number WP1 2-108 is listed alongside the NSN 5905-00-950-7660 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 94603, which identifies the specific Honeywell Sensing And Control facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-950-7660 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 009507660 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 138-001-0001 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.047 INCHES MINIMUM AND 1.057 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.4365 INCHES MINIMUM AND 0.4365 INCHES MINIMUM AND 0.437 INCHES MAXIMUM0.437 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.500 INCHES NOMINAL0.500 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1243 INCHES MINIMUM AND 0.1245 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.250 INCHES NOMINAL0.250 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 0.500 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 0.5000 INCHES NOMINAL0.5000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.6410 INCHES MINIMUM AND 0.6410 INCHES MINIMUM AND 0.6510 INCHES MAXIMUM0.6510 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTEDROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALLBALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFTSINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 287.0 MINIMUM AND 287.0 MINIMUM AND 297.0 MAXIMUM297.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES1.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.75 INCH-OUNCES0.75 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.006 INCHES0.006 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES0.001 INCHES |
| APXH | TERMINAL LOCATION | REAR ENDREAR END |
| AXGY | MOUNTING METHOD | CLAMP RINGCLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION2.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0 TO 2.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -3.0 TO 3.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
