If you are in search of dependable 3M1170C5-10A Screw Close Tolerance products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 3M1170C5-10A, a Houston Precision Fastener L L C component that is listed with the NSN 5305015263950 for identification purposes. When you are prepared to start the purchasing process for part number 3M1170C5-10A, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 3M1170C5-10A is listed alongside the NSN 5305-01-526-3950 and is categorized under the FSC 5305 Screws.
Additionally, this NSN part is specifically produced under CAGE Code 1VSL7, which identifies the specific Houston Precision Fastener L L C facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-526-3950 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015263950 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GS1014C5-10A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASL | HEAD DIAMETER | 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.312 INCHES NOMINAL" |
| AAVA | POINT DIAMETER | 0.469 INCHES NOMINAL" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES" |
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 24" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS" |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
| AASL | HEAD DIAMETER | 0.464 INCHES MINIMUM AND 0.473 INCHES MAXIMUM" |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM" |
| AAUR | GRIP DIAMETER | 0.312 INCHES NOMINAL" |
| AAVA | POINT DIAMETER | 0.469 INCHES NOMINAL" |
| ABQJ | POINT STYLE | FLAT" |
| ABQZ | INTERNAL DRIVE STYLE | TORX" |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES" |
| ANEE | GRIP LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM" |
| CMLP | THREAD QUANTITY PER INCH | 24" |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS" |
| FEAT | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH" |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL" |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL" |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL" |
| THSD | THREAD SERIES DESIGNATOR | UNJF" |
| AAJD | THREAD CLASS | 3A" |
| AAJF | THREAD DIRECTION | RIGHT-HAND" |
| AASA | THREAD LENGTH | 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM" |
| AASB | FASTENER LENGTH | 1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM" |
| AASK | HEAD STYLE | FLAT COUNTERSUNK" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
