If you are in search of dependable 3100PC32 Gear Helical products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 3100PC32, a John Reiner And Co Inc component that is listed with the NSN 3020002743324 for identification purposes. When you are prepared to start the purchasing process for part number 3100PC32, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 3100PC32 is listed alongside the NSN 3020-00-274-3324 and is categorized under the FSC 3020 Gear Pulley Sprocket and Transmission Chain.
Additionally, this NSN part is specifically produced under CAGE Code 50309, which identifies the specific John Reiner And Co Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-274-3324 Item PartTypeName: GEAR,HELICAL | 3020 | 002743324 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2896PC76049B | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | SPOKED |
| AGJS | PITCH DIAMETER | 6.4800 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 50 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CQFM | HARDNESS RATING | 15.0 ROCKWELL C MINIMUM HUB AND 23.0 ROCKWELL C MAXIMUM HUB |
| CQFM | HARDNESS RATING | 15.0 ROCKWELL C MINIMUM TEETH AND 23.0 ROCKWELL C MAXIMUM TEETH |
| CWCD | NOMINAL OUTSIDE DIAMETER | 6.675 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 14.5000 DEGREES |
| CWPZ | HELIX ANGLE | 39.5167 DEGREES |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.063 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.875 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.062 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.251 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 1.154 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.750 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.750 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | TIMING MARK ON CENTER OF TOOTH SPACE,FIRST SIDE OF GEAR FACE,7 DEG 1 MIN 15 SEC FROM CENTERLINE OF KEYWAY |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | ONE FLUSH HUB,ONE RECESSED HUB |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
