If you are in search of dependable ANBLP1 Resistor Variable Wire Wound Pre products, you can count on Rapid Mil Parts. You have taken a particular interest in part number ANBLP1, a Joint Electronics Type Designation System component that is listed with the NSN 5905006369047 for identification purposes. When you are prepared to start the purchasing process for part number ANBLP1, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number ANBLP1 is listed alongside the NSN 5905-00-636-9047 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 80058, which identifies the specific Joint Electronics Type Designation System facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-636-9047 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 006369047 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ANBLP1 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL STUDS MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | 2.093 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2493 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.312 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 305.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.003 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 50.000 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 1ST SECTION AND-0.50 TO 0.50 2ND SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
