If you are in search of dependable C11099-1-105 Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number C11099-1-105, a Lockheed Martin Corporation component that is listed with the NSN 5905011371606 for identification purposes. When you are prepared to start the purchasing process for part number C11099-1-105, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number C11099-1-105 is listed alongside the NSN 5905-01-137-1606 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 81755, which identifies the specific Lockheed Martin Corporation facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-137-1606 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 011371606 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3683S-1-105 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.295 INCHES MINIMUM AND 0.325 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.455 INCHES MINIMUM AND 1.465 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.805 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 1.045 INCHES MINIMUM AND 1.055 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.150 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| CBME | CUBIC MEASURE | 1.259 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 MEGOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/0.10 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/100.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/1.0 ALL SECTIONS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 81755-C11099 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
