If you are in search of dependable D35263 Motor Alternating Current products, you can count on Rapid Mil Parts. You have taken a particular interest in part number D35263, a Momentum Technologies Inc component that is listed with the NSN 6105004055023 for identification purposes. When you are prepared to start the purchasing process for part number D35263, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number D35263 is listed alongside the NSN 6105-00-405-5023 and is categorized under the FSC 6105 Motors Electrical.
Additionally, this NSN part is specifically produced under CAGE Code 34631, which identifies the specific Momentum Technologies Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-405-5023 Item PartTypeName: MOTOR,ALTERNATING CURRENT | 6105 | 004055023 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D35263 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CWGL | CURRENT RATING IN AMPS | 7.400 LOW INPUT OR 3.700 HIGH INPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL LOW INPUT OR 230.0 LINE TO NEUTRAL HIGH INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| FAAZ | PHASE | SINGLE INPUT |
| FEAT | SPECIAL FEATURES | SHAFT 2ND FLAT 90 DEG SAME DIM |
| FREQ | FREQUENCY IN HERTZ | 60.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
| AAJT | OVERALL HEIGHT | 5.812 INCHES |
| AAJU | OVERALL LENGTH | 10.188 INCHES |
| AAJV | OVERALL WIDTH | 5.812 INCHES |
| ABWV | SHAFT DIAMETER | 0.5000 INCHES NOMINAL SINGLE END |
| ABXQ | FLATTED PORTION LENGTH | 1.3120 INCHES NOMINAL SINGLE END |
| AGRB | FLAT DEPTH | 0.0470 INCHES NOMINAL SINGLE END |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| AXGY | MOUNTING METHOD | RESILIENT CRADLE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 SLOT |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | THERMAL PROTECTIVE DEVICE AND HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | 0.5000 HORSEPOWER OUTPUT |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.500 INCHES SINGLE END |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 3.000 INCHES SINGLE END |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.750 INCHES |
| CWFX | ROTOR SPEED RATING IN RPM | 3450.0 SINGLE FULL LOAD |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 4.250 INCHES |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
