If you are in search of dependable 73462 Hose Assembly Nonmetallic products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 73462, a Nacco Materials Handling Group Inc component that is listed with the NSN 4720014295416 for identification purposes. When you are prepared to start the purchasing process for part number 73462, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 73462 is listed alongside the NSN 4720-01-429-5416 and is categorized under the FSC 4720 Hose and Tubing Flexible.
Additionally, this NSN part is specifically produced under CAGE Code 30076, which identifies the specific Nacco Materials Handling Group Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-429-5416 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014295416 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 73462 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | FORKLIFT; SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE)" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 60.000 INCHES NOMINAL OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL" |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | FORKLIFT; SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE)" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH" |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 60.000 INCHES NOMINAL OVERALL" |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
