If you are in search of dependable JJC91462D Resistor Variable Nonwire Wound products, you can count on Rapid Mil Parts. You have taken a particular interest in part number JJC91462D, a Rockwell Automation Ltd component that is listed with the NSN 5905001163839 for identification purposes. When you are prepared to start the purchasing process for part number JJC91462D, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number JJC91462D is listed alongside the NSN 5905-00-116-3839 and is categorized under the FSC 5905 Resistors.
Additionally, this NSN part is specifically produced under CAGE Code 01121, which identifies the specific Rockwell Automation Ltd facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-116-3839 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 001163839 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G659063L2 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 2.375 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 0.344 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.031 INCHES MINIMUM AND 1.156 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.000 INCHES MINIMUM AND 1.438 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.250 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | 0.124 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 1.437 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 0.309 MINIMUM AND 0.315 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 10.000 KILOHMS 2ND SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 309.0 MINIMUM AND 315.0 MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 3 OCLOCK |
| CQPH | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO 300.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR 1ST SECTION AND 0.8 FREE AIR 2ND SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 1ST SECTION AND-10.0 TO 10.0 2ND SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
