If you are in search of dependable 123741-3D6P Screw Close Tolerance products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 123741-3D6P, a Sps Technologies Inc component that is listed with the NSN 5305013363216 for identification purposes. When you are prepared to start the purchasing process for part number 123741-3D6P, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 123741-3D6P is listed alongside the NSN 5305-01-336-3216 and is categorized under the FSC 5305 Screws.
Additionally, this NSN part is specifically produced under CAGE Code 80539, which identifies the specific Sps Technologies Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-336-3216 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013363216 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VCL0008-3D6P | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.531 INCHES MINIMUM FIRST HOLE AND 0.581 INCHES MAXIMUM FIRST HOLE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AASB | FASTENER LENGTH | 0.705 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
