If you are in search of dependable BACB30ST7-36 Bolt Shear products, you can count on Rapid Mil Parts. You have taken a particular interest in part number BACB30ST7-36, a Sps Technologies Inc component that is listed with the NSN 5306012391320 for identification purposes. When you are prepared to start the purchasing process for part number BACB30ST7-36, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number BACB30ST7-36 is listed alongside the NSN 5306-01-239-1320 and is categorized under the FSC 5306 Bolts.
Additionally, this NSN part is specifically produced under CAGE Code 80539, which identifies the specific Sps Technologies Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5306-01-239-1320 Item PartTypeName: BOLT,SHEAR | 5306 | 012391320 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| BACB30ST7-36 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.456 INCHES MINIMUM AND 0.486 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 3.113 INCHES MINIMUM AND 3.143 INCHES MAXIMUM |
| AASK | HEAD STYLE | DISHED HEXAGON |
| AASU | HEAD HEIGHT | 0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4363 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| ANEE | GRIP LENGTH | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM FASTENER AND 40.0 ROCKWELL C MAXIMUM FASTENER |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.571 INCHES MINIMUM FIRST HOLE AND 2.631 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| FEAT | SPECIAL FEATURES | FASSEMBLY AREA EXTENDED AT THREADED END,0.402 MIN. AND 0.412 MAX. LENGTH 0.369 MIN. AND 0.372 MAX. DIAMETER; ASSEMBLY CONTAINS RETAINER PAWL,MATERIAL CRES PER AMS 5643,ROCKWELL HARDNESS 35.0 MIN. AND 39.0 MAX.,FINISH BLAST PER BAC 5951,PASS |
| MATT | MATERIAL | STEEL COMP E4340 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 8740 FASTENER OR STEEL COMP 8735 FASTENER OR STEEL COMP 6150 FASTENER |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
