If you are in search of dependable T12SH1032BC Nut Self Locking Plate products, you can count on Rapid Mil Parts. You have taken a particular interest in part number T12SH1032BC, a Sps Technologies Inc component that is listed with the NSN 5310007747136 for identification purposes. When you are prepared to start the purchasing process for part number T12SH1032BC, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number T12SH1032BC is listed alongside the NSN 5310-00-774-7136 and is categorized under the FSC 5310 Nuts and Washers.
Additionally, this NSN part is specifically produced under CAGE Code 11815, which identifies the specific Sps Technologies Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-774-7136 Item PartTypeName: NUT,SELF-LOCKING,PLATE | 5310 | 007747136 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| T12SH1032BC | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ADEB | PLATE THICKNESS | 0.047 INCHES MAXIMUM |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| AZKQ | TEMP RATING | 450.0 DEG FAHRENHEIT MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | 49.0 ROCKWELL C MAXIMUM |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| ABTB | MOUNTING HOLE DIAMETER | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ACTA | NUT STYLE | PLATE |
| ACVN | NUT LENGTH | 1.013 INCHES MAXIMUM |
| ADEA | NUT HEIGHT | 0.281 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.406 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNJF |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM NUT AND 101.0 DEGREES MAXIMUM NUT |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
