If you are in search of dependable A100-974-1935 Hose Assembly Nonmetallic products, you can count on Rapid Mil Parts. You have taken a particular interest in part number A100-974-1935, a Tri State Hose And Fitting Inc component that is listed with the NSN 4720009741935 for identification purposes. When you are prepared to start the purchasing process for part number A100-974-1935, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number A100-974-1935 is listed alongside the NSN 4720-00-974-1935 and is categorized under the FSC 4720 Hose and Tubing Flexible.
Additionally, this NSN part is specifically produced under CAGE Code 65407, which identifies the specific Tri State Hose And Fitting Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-974-1935 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 009741935 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| F4210667-6-6-6-16.50 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 1A 2ND END |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT,INVERTED FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CBBL | FEATURES PROVIDED | NONSKIVE AND REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 45.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 16.500 INCHES NOMINAL OVERALL |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID,WATER BASE AND FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 2ND END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
