If you are in search of dependable 1321F Shaft Axle Automotive products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 1321F, a U S Axle Inc component that is listed with the NSN 2520007735496 for identification purposes. When you are prepared to start the purchasing process for part number 1321F, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 1321F is listed alongside the NSN 2520-00-773-5496 and is categorized under the FSC 2520 Vehicle Power Transmission Components.
Additionally, this NSN part is specifically produced under CAGE Code 61256, which identifies the specific U S Axle Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-773-5496 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 007735496 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GPW4234 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUB | HOLE DIAMETER | 0.391 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 22.500 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 341.0 MINIMUM BRINELL STANDARD AND 388.0 MAXIMUM BRINELL STANDARD |
| AHTC | FLANGE OUTSIDE DIAMETER | 4.094 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.915 INCHES MINIMUM AND 0.957 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.115 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE AND 6 UNTHREADED HOLE |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTT | SECOND END BEARING SEAT | INCLUDED |
| BNTW | SECOND END BEARING SEAT WIDTH | 0.937 INCHES NOMINAL |
| BNYS | FLANGE OVERALL THICKNESS | 0.500 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.312 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4140 ASSN STD SINGLE MATERIAL RESPONSE |
| ABUJ | THREAD SIZE | 3/8-16 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AMGA | SECOND END SPLINE LENGTH | 1.562 INCHES NOMINAL |
| AMHL | SECOND END BEARING SEAT DIAMETER | 1.190 INCHES MINIMUM AND 1.192 INCHES MAXIMUM |
| AMHM | SECOND END DISTANCE FROM BEARING SEAT TO END | 2.750 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| MATT | MATERIAL | STEEL COMP 4140 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
