If you are in search of dependable 20SW-20SF90-47-1-2 Hose Assembly Nonmetallic products, you can count on Rapid Mil Parts. You have taken a particular interest in part number 20SW-20SF90-47-1-2, a Veyance Technologies Inc component that is listed with the NSN 4720007896556 for identification purposes. When you are prepared to start the purchasing process for part number 20SW-20SF90-47-1-2, we provide online RFQ forms to fill out and submit for the means of receiving competitive quotes for your comparisons.
Note : We Will Not Share Your Information With Any Third Parties.
Our dedication to quality is not merely a statement, and we strive to always exceed industry expectations for your benefit with the best NSN products, aerospace parts, military and defense parts, and other similar items on the market. For your convenience, part number 20SW-20SF90-47-1-2 is listed alongside the NSN 4720-00-789-6556 and is categorized under the FSC 4720 Hose and Tubing Flexible.
Additionally, this NSN part is specifically produced under CAGE Code 63906, which identifies the specific Veyance Technologies Inc facility it traces back to. If you are interested in kicking off procurement for your needs through phone or email or simply wish to discuss our diverse services and your purchasing options, do not hesitate to connect with a staff member of ours today!
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-789-6556 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 007896556 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 20SW-20SF90-47-1-2 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.574 INCHES NOMINAL 1ST END |
| ABKV | OUTSIDE DIAMETER | 1.797 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 8.000 INCHES |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.094 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AFQN | FLANGE LENGTH | 3.125 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER HELIX WIRE COIL AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 47.500 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL,HYDROCARBON AND WATER SINGLE RESPONSE |
| AARX | INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| AGFF | FLANGE WIDTH | 2.782 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CQBD | BURST TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| FEAT | SPECIAL FEATURES | PERMANENT END FITTINGS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
